Caterpillar 3412 Cylinder Head Parts Catalog

The Caterpillar 3412 is one of the most respected V12 diesel engines ever produced, designed for heavy-duty marine, industrial, and power generation applications. Its cylinder head system is central to performance, efficiency, and reliability. Whether you are maintaining a 3412 for continuous-duty marine propulsion, rebuilding one for offshore drilling rigs, or supporting industrial power systems, sourcing the right cylinder head parts ensures your engine continues to deliver dependable service.

Diesel Pro Power supports Caterpillar 3412 owners worldwide with a comprehensive catalog of cylinder heads, valves, gaskets, bolts, guides, and all related components. With global shipping, decades of experience, and over 40,000 satisfied customers, Diesel Pro Power is a trusted partner for keeping 3412 engines running strong.

Complete Cylinder Head Assemblies for Caterpillar 3412 Engines

Bare Cylinder Heads

For operators planning a complete top-end rebuild, bare cylinder heads are an ideal choice. These come as new castings without valves, springs, or internal hardware installed. By starting with a bare head, you have full flexibility to configure the head with fresh components that match your specific arrangement number or duty cycle requirements.

Bare cylinder heads are most commonly selected when:

• Existing heads have cracked from overheating or thermal stress.

• Valve seat areas are worn beyond machining limits.

• Previous repair attempts have compromised casting integrity.

By installing a new head casting, operators can reset the clock on critical top-end performance, ensuring proper compression, cooling, and airflow for many more operating hours.

Cylinder Heads with Valves and Springs Installed

For operators seeking a faster and more convenient solution, complete cylinder heads with valves and springs pre-installed are available. These assemblies arrive ready for installation, reducing downtime and ensuring that all internal tolerances and fits are correct from the start.

Advantages of choosing a fully assembled head include:

• Reduced labor time during rebuilds.

• Assurance that valves, springs, and locks are properly matched.

• Elimination of guesswork when sourcing individual valve components.

This option is especially popular for ship operators, offshore platforms, and power stations where rapid turnaround is essential.

Cylinder Head Gasket Sets for Caterpillar 3412

Every top-end rebuild requires a complete gasket set. For the Caterpillar 3412, one gasket set typically covers two heads. These kits include all seals necessary for reassembling the cylinder heads and ensuring a perfect combustion chamber seal.

High-quality gaskets are essential because:

• They prevent coolant and oil leaks into the combustion chamber.

• They maintain compression under extreme cylinder pressures.

• They provide the sealing surface between heads and engine block.

Certain gasket sets are designated for specific serial number prefixes such as 3JK, 7BL, 7HG, 9KS, and 9PW. Matching your gasket set to your engine’s serial ensures the best possible fit and reliability.

Head Bolts and Fasteners for Caterpillar 3412

The integrity of the cylinder head assembly depends on strong, properly torqued fasteners. Diesel Pro Power offers:

• Standard Head Bolts for 3412, 3406, and 3408 engines.

• Heavy-duty Bolts designed for high-output versions of the 3412.

• Bolt Washers to provide even torque distribution and prevent head movement under load.

Reusing old bolts is not recommended. New fasteners ensure proper clamping force, prevent head gasket failures, and extend the lifespan of your rebuild.

Intake and Exhaust Valves

The Caterpillar 3412 relies on precision-machined intake and exhaust valves to control airflow and combustion gas release. These valves must withstand extreme temperatures, high pressures, and constant cycling.

Intake Valves

Intake valves are responsible for allowing the fuel-air mixture into the combustion chamber. Diesel Pro Power provides multiple intake valve options, depending on the engine arrangement. Certain versions are specifically designed for the 3412E, while others interchange with the 3406 and 3408 families.

When replacing intake valves, always confirm:

• The correct arrangement number match.

• Whether your engine requires hardened seats for continuous-duty service.

• The number of valves per cylinder (24 per engine on some models).

Exhaust Valves

Exhaust valves release combustion gases after the power stroke. On the 3412, these valves endure the highest thermal loads. Fresh, high-quality exhaust valves prevent warping, sticking, and valve seat damage.

Diesel Pro Power stocks exhaust valves for multiple Caterpillar 3412 configurations, including marine, industrial, and 3412E models.

Valve Train Components

Rotocoils

Rotocoils extend valve life by slowly rotating the valve each time it opens. This prevents uneven wear and reduces carbon buildup. Replacing worn rotocoils is inexpensive insurance against costly valve seat failures.

Valve Guides and Oil Shields

Valve guides ensure proper valve alignment and minimize oil leakage into the combustion chamber. Oil shields (or seals) add another layer of protection, keeping combustion efficient and reducing blue smoke emissions.

Valve Seats and Inserts

Valve inserts, also known as valve seats, provide a hardened surface for valves to seal against. These are particularly important for engines operating under heavy load or with high sulfur fuel, where valve seat wear can accelerate.

Valve Springs

Strong, consistent valve springs are critical for maintaining valve timing and preventing valve float at high RPM. Caterpillar 3400 Series engines—including the 3412—rely on precisely engineered springs for both intake and exhaust valves.

Valve Locks

Valve locks secure valves to retainers and springs. Each valve requires two locks. Though small and inexpensive, they are vital for reliable operation. A failed lock can result in dropped valves and catastrophic engine damage.

Cylinder Head Seals and Gaskets

Individual Head Gaskets

Two cylinder head gaskets are required per 3412 engine. Replacing both ensures consistent sealing across the entire engine.

Precombustion Chamber Gaskets

Certain 3400 Series Caterpillar engines use precombustion chambers that require small, dedicated gaskets. These are replaced whenever chambers are removed or serviced.

Injector Adaptor Nozzles and Seals

Adaptor nozzles guide fuel injectors into the head. O-rings provide a tight seal to prevent fuel leakage. Diesel Pro Power offers both nozzles and their O-ring seals for Caterpillar 3412 engines.

Push Rods, Lifters, and Tappets

Push rods transfer motion from the camshaft to the rocker arms, opening and closing valves. Lifters (tappets) ensure smooth, low-friction motion, reducing wear on valve train components. Worn push rods or lifters can cause misfires, loss of power, or irregular valve timing.

Diesel Pro Power supplies precision-machined push rods and lifters to restore valve timing integrity on Caterpillar 3412 engines.

Applications of the Caterpillar 3412 Cylinder Head System

The Caterpillar 3412 engine has been deployed in:

• Marine propulsion systems – yachts, fishing vessels, ferries, and offshore supply vessels.

• Industrial applications – oilfield equipment, drilling rigs, and construction machinery.

• Power generation – backup generators for hospitals, data centers, and critical infrastructure.

In each application, cylinder head reliability is essential. A failed head gasket, cracked head, or worn valve can result in major downtime. Replacing these components proactively ensures dependable performance in the most demanding environments.

Why Choose Diesel Pro Power for Caterpillar 3412 Cylinder Head Parts

When investing in cylinder head parts for a Caterpillar 3412 engine, the supplier you choose is just as important as the quality of the parts themselves. A reliable partner ensures your rebuild or repair is completed with the right components, delivered on time, and backed by technical expertise. Diesel Pro Power stands out as a trusted resource for marine and industrial engine operators around the world.

• Global Reach – With fast, reliable shipping to more than 180 countries, Diesel Pro Power minimizes costly downtime and keeps vessels, power plants, and industrial equipment operating without unnecessary delays. Whether you are in a major port city or a remote offshore location, our logistics network ensures your parts arrive when you need them.

• Trusted Customer Base – Over 40,000 satisfied customers worldwide rely on Diesel Pro Power as their go-to supplier for Caterpillar engine parts. Our reputation has been built on consistent service, accurate orders, and a deep understanding of the demands of marine and heavy-duty applications.

• Comprehensive Catalog – From complete cylinder heads to the smallest valve lock, everything you need is available in one place. Instead of dealing with multiple vendors, you can source your entire top-end rebuild through a single, reliable supplier. This ensures part compatibility, reduces administrative work, and simplifies the purchasing process.

• Marine and Industrial Focus – Unlike general automotive suppliers, Diesel Pro Power is dedicated to engines that operate in demanding, continuous-duty conditions. We understand the difference between a part that might work in a truck and one that is designed for a generator, drilling rig, or marine propulsion system. Every product we stock is chosen with durability, reliability, and heavy-duty performance in mind.

• Expert Support – Choosing the correct cylinder head, gasket set, or valve requires more than just a part description. Our team provides hands-on guidance to help you match the right components to your engine’s arrangement number or serial prefix. This technical support reduces the risk of downtime, prevents mismatched parts, and ensures your Caterpillar 3412 engine continues to perform at its best.

In short, Diesel Pro Power combines global accessibility, proven trust, comprehensive inventory, specialized focus, and expert support to give you confidence in every part you purchase.