Cummins 4BTA Engine Parts for Australia - Connecting Rod Section

Connecting Rods & Related Components for Cummins 4BTA

The connecting rod is one of the most critical components inside the Cummins 4BTA engine, acting as the direct link between the piston and the crankshaft. In marine and industrial applications, where the 4BTA is valued for its durability and efficiency, the connecting rod plays a major role in transferring combustion energy into rotational motion while withstanding enormous pressure, heat, and constant reciprocating movement. This section covers connecting rods, rod bearings, bushings, and fasteners available for the Cummins 4BTA—providing insight into component variations, installation considerations, and selection tips to ensure optimal engine performance and longevity.

Understanding the Cummins 4BTA Connecting Rod

A connecting rod for the Cummins 4BTA is engineered to withstand repeated high-load cycles. Its strength and geometry ensure that combustion force is transferred without excess flex or stress, minimizing wear on the piston and crankshaft.

Two main designs are used in the B-series family, including the 4BTA:

• Fracture-Split (Fractured) Rods – Manufactured as a single piece, then split at the cap joint to create a perfectly matched surface. This design improves precision alignment but requires specific bolts and bearings.

• Non-Fractured (Conventional) Rods – Manufactured with a machined cap joint. These rods use standard bolts and allow for certain reconditioning processes.

Bearing Sets for Cummins 4BTA Connecting Rods

Rod bearings are the replaceable surfaces that allow the connecting rod to rotate smoothly on the crankshaft journal. They also protect the crankshaft from direct metal-to-metal contact. Cummins offers different bearing sizes to account for crankshaft journal wear or machining:

Standard Size Bearings

• Non-Fractured Rod Bearings – Designed for conventional rods, these standard-size bearings provide a direct replacement when crankshaft journals are within original specifications.

• Fractured Rod Bearings – Precision-fit bearings for fracture-split connecting rods, ensuring proper clearance and load distribution.

Oversized Bearings (0.25 mm & 0.50 mm)

Oversized rod bearings are used after crankshaft journals have been machined undersize due to wear, scoring, or damage. The increased thickness restores proper oil clearance and prevents premature failure.

• 0.25 mm Oversize Bearings – Ideal after a light crankshaft regrind.

• 0.50 mm Oversize Bearings – Used when journals require a deeper cut for proper restoration.

Connecting Rod Bushings for Cummins 4BTA

Located at the small end of the connecting rod, the rod bushing supports the piston pin, allowing it to pivot smoothly as the piston moves up and down. The bushing must withstand both reciprocating and oscillating motion under combustion loads.

• Material – Typically a precision-machined bronze alloy for durability and resistance to galling.

• Replacement – Worn bushings should be replaced to prevent piston pin scoring and loss of compression sealing.

Connecting Rod Cap Bolts

Rod bolts secure the connecting rod cap to the rod body, holding the crankshaft journal in place. Because they are subject to extreme cyclic stress, Cummins rod bolts should always be replaced during a rebuild.

Early Style (Non-Fractured Rods)

• Used in traditional connecting rods with machined mating surfaces.

• Designed for reuse only if they pass Cummins inspection standards, though replacement is strongly recommended.

Fracture-Split Rod Bolts

• Purpose-built for fracture-split rods with unique cap alignment surfaces.

• Designed for one-time use to maintain clamping force integrity.

Best Practices for Connecting Rod Service in the 4BTA

1. Identify Rod Type Before Ordering Parts

• Always confirm whether the engine uses fracture-split or non-fractured connecting rods, as bearings, bolts, and installation methods differ.

• Even if they appear visually acceptable, used bearings can have unseen fatigue or wear that leads to failure under load.

• Over- or under-tightening rod bolts can cause bearing crush issues, journal scoring, or even catastrophic engine failure.

• Ensure piston pin bushings meet Cummins clearance specifications for oil lubrication and load support.

• Using a fractured rod bearing in a non-fractured rod (or vice versa) can cause oil clearance and alignment problems.

Why Choose Diesel Pro Power for Cummins 4BTA Connecting Rod Components

With over 40,000 satisfied customers, Diesel Pro Power has built a reputation for delivering genuine-quality Cummins parts worldwide—quickly, reliably, and with knowledgeable support. Our Cummins 4BTA connecting rod inventory includes rods, bearings, bushings, and bolts for both fracture-split and conventional rod designs, ensuring you get the right part the first time.

Our parts are:

• Precision-Made for proper fit and alignment.

• Marine & Industrial Grade to handle the demands of the 4BTA’s heavy-duty applications.

• In Stock and ready for fast shipping to minimize downtime.