Cummins ISX Single Cam Parts for Australia - Gasket Section

Cummins ISX Single Cam Parts — Gasket Section

Keep your ISX Single Cam sealed tight and leak-free with gasket sets and service seals organized for quick selection. Start with the Upper Gasket Set: choose the non-EGR version for engines built without exhaust gas recirculation, or the EGR-equipped version when an EGR cooler and related passages are present. These upper sets cover top-end sealing during head service—intake and exhaust manifold interfaces, valve cover perimeter, injector and coolant transfer points—so you restore compression and stop coolant or soot tracking after a head refresh. Pair that with the Lower Gasket Set to address bottom-end interfaces during pan-off or timing gear work; again, select non-EGR or EGR depending on your configuration. For later calibrations, the Lower Gasket Set for Control Module 2350 aligns materials and shapes with the 2350 architecture to avoid mismatch at the gear housing, oil cooler base, and flywheel housing.

For targeted replacements, choose individual pieces: the Oil Pan Gasket to correct weeping at the rail; Gear Housing Gasket when timing cover or idler service introduces seepage; Valve Cover Gaskets (new and old-style options) to cure misting around the rocker housing; Front Cover Seal Strips (upper and lower) to complete a front structure reseal; Flywheel Housing Gasket to stop rear block interface leaks; and the Turbo Gasket to prevent exhaust leaks that hurt spool and efficiency. Round out the job with pro-grade sealants and helpers: high-temp jointing compound for turbo joints, high-tack gasket spray to hold cut gaskets in place, sensor-safe RTV for modern electronics, non-hardening pliable sealant for flexible joints, red high-strength threadlocker for critical fasteners, and cold-weld epoxy for emergency metal repairs. Select once, seal it right, and put your ISX back to work with confidence.