Parts For Detroit Diesel Series 60 14 Ltr Parts for Australia - Marine Water Pump Section

Detroit Diesel Series 60 14L Marine Engine – Water Pump & Cooling System Components

The Detroit Diesel Series 60 14-liter marine engine is one of the most reliable and efficient inline-six diesel powerplants ever developed for heavy-duty marine propulsion and auxiliary applications. Its balance of power, fuel efficiency, and durability has made it a preferred choice among vessel operators around the world. For optimal performance in marine environments, a properly functioning raw water pump system is absolutely critical. The raw water pump is responsible for circulating seawater through the engine’s cooling system, helping maintain the ideal operating temperature even under continuous high-load operation.

At Diesel Pro Power, trusted by over 40,000 satisfied customers worldwide, you can find every essential part for your Detroit Diesel Series 60 marine water pump system — from the complete raw water pump assembly to the smallest O-ring or clamp. Each part is engineered to OEM-level precision, ensuring dependable performance and long service life in the demanding conditions of saltwater use.

Marine Raw Water Pump for Detroit Diesel Series 60 Engines

The Marine Raw Water Pump is the heart of the cooling system in the Series 60 marine engine. This bidirectional pump is designed for dual rotation capability — meaning it can operate in either right-hand (clockwise) or left-hand (counterclockwise) rotation, depending on engine configuration and installation.

Key Features:

• Designed for Detroit Diesel 60 Series 14-liter marine engines.

• 2-inch flange port connection for secure seawater flow.

• Rugged marine-grade housing and impeller construction to resist corrosion and saltwater wear.

• Precision-balanced impeller for consistent flow and pressure.

• Available brand-new and fully assembled for direct installation.

This water pump provides the constant seawater flow required to cool the heat exchanger, oil cooler, and other auxiliary components that prevent engine overheating. Its high-volume design ensures steady operation even under the extreme temperatures of continuous duty cycles in commercial and recreational marine engines.

Seal O-Ring for Marine Water Pump

Every water pump rebuild or maintenance service should include replacement of the seal O-rings. These small but essential components prevent seawater from leaking around the pump cover, impeller housing, and connection flanges.

Product Highlights:

• Two O-rings required per water pump.

• Manufactured from high-resistance elastomer materials suitable for saltwater exposure.

• Designed for perfect fit and sealing on Series 60 water pump assemblies.

• Maintains integrity under continuous thermal cycling and vibration.

Failing to replace the O-rings during service may lead to leaks that reduce cooling efficiency and eventually cause overheating or pump damage. Diesel Pro Power ensures these seals meet or exceed OEM specifications, providing lasting performance.

Impellers for Detroit Diesel Marine Water Pumps

The impeller is the rotating element that drives seawater into the cooling system. Diesel Pro offers both 4-1/2-inch and 3-3/4-inch impellers, covering various configurations used on Series 60, 12V92, and 16V92 engines.

4-1/2” Diameter Impeller

This heavy-duty impeller is engineered for maximum water displacement in larger marine cooling systems. Constructed from reinforced flexible neoprene, it maintains consistent flow rates and excellent resistance to saltwater corrosion.

Specifications:

• Diameter: 4-1/2 inches.

• Compatible with Detroit Diesel 60 Series water pumps.

• Designed for high-output marine applications.

3-3/4” Diameter Impeller (12-Blade, Double Flat Drive)

Ideal for both Caterpillar and Detroit Diesel marine pumps, this impeller uses a 12-blade design for smooth, vibration-free operation and consistent pressure. The double flat drive ensures a positive connection to the pump shaft, eliminating slippage under heavy load.

Cam for Impeller – Precision Flow Control

The cam inside the raw water pump housing guides the impeller blades and helps maintain consistent flow by forcing them to flex and discharge water efficiently. A worn or damaged cam can cause reduced flow and premature impeller wear.

Features:

• Designed specifically for 4-1/2” diameter impellers.

• Built from corrosion-resistant bronze for marine durability.

• Machined to precise tolerances for maximum water displacement and flow balance.

Replacing the cam during water pump overhauls ensures optimal flow performance and prolongs the lifespan of impellers and seals.

Coupling for Accessory Drive

The Detroit Diesel accessory drive coupling connects the raw water pump to the engine’s accessory drive gear, transmitting mechanical power to drive the pump impeller.

Details:

• 21-tooth coupling design.

• Hardened steel teeth for superior torque transmission.

• Designed for Series 60 engines and compatible marine installations.

Proper engagement between the coupling and drive assembly ensures efficient power transfer with minimal wear on shafts and bearings.

Water Pump Repair Kits

Diesel Pro Power offers both with-shaft and without-shaft repair kits** for Detroit Diesel Series 60 raw water pumps, enabling you to rebuild your existing pump assembly to like-new condition.

Repair Kit – Without Shaft

Includes seals, O-rings, bearings, gaskets, and wear plates necessary for a full pump rebuild when the original shaft remains serviceable. This kit is ideal for preventive maintenance and periodic overhauls.

Repair Kit – With Shaft

Contains every internal component — including a brand-new shaft — for complete restoration of your marine water pump. Using precision-engineered parts ensures smooth rotation, reliable sealing, and proper alignment for years of operation.

Each repair kit is designed for 4-1/2-inch impeller applications and provides the same quality as OEM replacements at a more accessible price point.

Wear Plate – Stainless Steel Protection

Located behind the impeller, the wear plate shields the pump housing from abrasion and corrosion caused by continuous seawater circulation.

Features:

• Stainless steel construction for superior corrosion resistance.

• Designed for 4-1/2-inch impeller water pumps.

• Maintains precise clearance and efficient sealing within the pump housing.

Replacing worn plates restores full pumping efficiency and helps extend the service life of both the impeller and housing.

Marine Water Pump Shaft Seal

The shaft seal prevents seawater from leaking along the pump drive shaft where it connects to the engine. This is a critical component for maintaining pump integrity and protecting engine accessories from corrosion.

Highlights:

• Designed for Detroit Diesel marine applications.

• Built from marine-grade elastomer and stainless-steel reinforcement.

• Provides watertight operation under all RPM ranges.

Routine inspection and timely replacement of the shaft seal are essential in preventing costly corrosion or bearing failure in the water pump assembly.

Marine Hose Clamps for Coolant and Fuel Systems

Proper clamping is essential for secure hose connections across the cooling and fuel systems. Diesel Pro Power offers a full range of marine-grade hose clamps to fit different diameters.

Clamp Sizes Available:

• From 9/16” up to 3” effective diameter range.

• Corrosion-resistant stainless steel construction.

• Designed for both coolant and seawater lines.

Each clamp ensures a secure fit under constant vibration, pressure, and temperature fluctuations common in marine engine environments.

Related Marine Components and Accessories

Diesel Pro Power provides a complete ecosystem of components to complement your Series 60 marine cooling and control systems:

• Mechanical and Electric Gauges: Available in 12V and 24V configurations, with or without alarms, for monitoring coolant temperature, pressure, and flow.

• Marine Controls & Cables: Engine throttle and transmission control cables built to SAE marine standards, including 33C and 43C thread types.

• Steering Systems: Marine-grade steering components designed for precise maneuvering and corrosion resistance.

• Navigation & Lighting Systems: From marine searchlights to navigation lights and bulbs, all built for offshore durability.

• Rubber Bearings: For propulsion shafts and rudder systems, ensuring smooth, vibration-free operation.

Each of these components complements your Series 60 cooling and control setup, ensuring your vessel’s systems remain synchronized, reliable, and seaworthy.

Importance of Maintaining Your Detroit Diesel Series 60 Marine Cooling System

The Series 60 engine operates at high thermal loads, especially during continuous cruising, towing, or industrial-duty service. A properly functioning raw water pump ensures effective heat exchange and protects key engine components such as:

• Cylinder liners and pistons.

• Turbochargers and intercoolers.

• Lubrication oil coolers and transmission heat exchangers.

Neglecting water pump maintenance can lead to overheating, reduced engine efficiency, and even catastrophic engine failure. Regular inspection and timely replacement of seals, impellers, and wear plates ensure uninterrupted performance and longevity.

Why Choose Diesel Pro Power For Your Detroit Diesel Series 60 14L Raw Water Pump & Cooling System Needs

Diesel Pro Power has earned its reputation as the global leader in Detroit Diesel marine engine parts by consistently delivering reliability, precision, and exceptional service to vessel owners and operators worldwide. Whether you operate a commercial tugboat, fishing trawler, yacht, or industrial marine application powered by the Detroit Diesel Series 60 14-liter engine, Diesel Pro Power provides the confidence you need to keep your vessel running at peak performance.

When you purchase your Series 60 raw water pump and cooling system components from Diesel Pro Power, you benefit from a supply chain and customer experience built specifically for marine professionals:

• All parts in stock and ready to ship worldwide.
  No backorders, no long delays — Diesel Pro maintains one of the largest independent inventories of Detroit Diesel parts anywhere. This means your water pump, impeller, seals, and gaskets can be dispatched immediately, helping you minimize downtime and return to operation quickly.

• Real-time order tracking and transparent delivery updates.
  Diesel Pro’s advanced logistics system allows customers to track their shipments from the warehouse to their dock. You receive constant visibility of where your order is and when it will arrive — a crucial advantage for time-sensitive marine repairs or scheduled maintenance.

• Expert technical assistance from Detroit Diesel-trained specialists.
  Every Diesel Pro technician and representative is trained specifically on Detroit Diesel systems, including the Series 60’s marine configuration. Whether you’re diagnosing a cooling system issue, choosing the right impeller size, or rebuilding a raw water pump, you can rely on expert guidance and detailed installation support.

• Comprehensive warranty and satisfaction guarantee.
  Diesel Pro Power stands firmly behind the quality of every product it sells. All parts — from complete raw water pump assemblies to wear plates, O-rings, and hose clamps — are covered by a full warranty. Each component undergoes strict inspection to ensure compatibility, performance, and marine-grade reliability.

• Proven reputation among 40,000+ satisfied customers worldwide.
  Diesel Pro’s customer base spans over 180 countries and includes commercial fleets, military vessels, offshore operators, and private yacht owners. This long-standing trust was earned through consistent quality, dependable delivery, and honest customer service.

Beyond simply supplying components, Diesel Pro Power provides a complete ecosystem of technical resources and professional-grade support. Every product listing includes detailed specifications, cross-references, and application data to help customers identify exactly what they need for their Detroit Diesel Series 60 engine.

Each part in the raw water pump and cooling system lineup — whether it’s the impeller, cam, or stainless-steel wear plate — is engineered or sourced to OEM-equivalent or better standards, ensuring proper fit and long-term reliability. Marine environments demand corrosion resistance, precision machining, and material strength. Diesel Pro Power meets these demands by partnering with industry-leading manufacturers and conducting independent quality control checks before every shipment.

Another key reason professionals choose Diesel Pro is its dedicated marine focus. Unlike general parts suppliers, Diesel Pro Power specializes in marine-grade Detroit Diesel components, offering tailored guidance that considers the unique stresses of saltwater operation. From identifying bidirectional pump configurations to matching flange port sizes, the company ensures you get parts that work seamlessly within your vessel’s setup.

In addition, Diesel Pro’s bilingual customer service and international shipping expertise make it the preferred partner for global fleets. With customers across North America, South America, Europe, Asia, and Oceania, Diesel Pro Power understands customs, import requirements, and shipping logistics, making the ordering process smooth and worry-free for operators anywhere in the world.

In short, when you choose Diesel Pro Power, you’re not just purchasing replacement parts — you’re investing in precision, trust, and uptime. Every Series 60 raw water pump component is backed by the same commitment to quality that has made Diesel Pro Power the first choice for thousands of marine engineers and operators worldwide.

Diesel Pro Power ensures that every part — from the complete pump assemblies to the smallest seals, clamps, and O-rings — is manufactured, inspected, and tested to meet the rigorous standards of marine endurance. This commitment to excellence keeps your Detroit Diesel Series 60 14L engine performing efficiently, reliably, and ready to power your next voyage.