Parts for Detroit Diesel 16V71 Non-Turbo for Australia - Blower Section

Parts for Detroit Diesel 16V71 Non-Turbo – Blower Section

The Detroit Diesel 16V71 is a powerhouse among the Series 71 family, built for continuous duty in marine and industrial applications where reliability and airflow efficiency are everything. At the heart of its performance is the Roots-type blower, the component responsible for delivering the precise volume of air needed for clean combustion and consistent horsepower. The following section showcases a complete range of Detroit Diesel blower components and accessories for both 8V71 and 16V71 engines, available rebuilt and ready for installation — all backed by Diesel Pro Power’s decades of expertise and worldwide delivery to over 180 countries.

Detroit Diesel Blower for 8V71 and 16V71 – Rebuilt

This fully rebuilt Detroit Diesel blower is designed for Series 71 V-configurations, including 8V71 and 16V71 engines. Each unit undergoes a complete teardown, inspection, and rebuild process using high-quality replacement components and precision tolerances that match OEM specifications. The result is consistent airflow, smooth idle, and optimal combustion for both marine and stationary applications.

Every blower is sold with a refundable core deposit, ensuring that your exchange process is efficient and environmentally responsible. These blowers are perfect for customers looking to restore lost power or eliminate oil leakage and low boost issues common in older engines.

Detroit Diesel Blower Repair Kit – Series 71

Keep your existing blower performing at its peak with the Detroit Diesel blower repair kit for Series 71 engines. Designed for natural (non-turbocharged) configurations, this comprehensive kit includes seals, bearings, and gaskets required to restore blower efficiency and prevent air leaks.

Whether you’re performing maintenance on a 6-71, 8-71, or 16V71, this kit provides the essential components to extend service life and restore consistent boost pressure. Proper sealing in the blower is critical — even small air leaks can result in lower compression and reduced fuel efficiency.

Blower Installation Gasket Kits for 16V71, 16V92, and Series 71-92 Engines

Dual-Blower Installation Gasket Kit

This gasket kit is specifically designed for 16V71 and 16V92 engines, covering two blowers per set. It ensures proper sealing during installation, preventing air and oil leaks that can lead to performance loss.

Single-Blower Installation Gasket Kit

For mechanics and operators working on Series 71 and 92 natural engines, this version includes the required gaskets to properly mount a single blower. Each gasket is made from high-temperature-resistant material to ensure durability under extreme conditions typical in marine engine compartments.

Blower Couplings and Shafts

Proper power transfer between the blower and drive gear depends on durable, precision-fit coupling components. Diesel Pro Power offers both thin 48-spline and thick 29-spline versions to match your engine’s configuration.

Blower Coupling – Thin 48 Spline Shaft

Ideal for Series 71 and 92 engines, this Detroit Diesel blower coupling ensures tight fitment with minimal play between the shaft and drive hub.

Blower Shaft – 7” Thin 48 Spline

This 7-inch shaft is engineered for the 8V71 and 16V71 blowers, providing exact alignment and balance for consistent blower rotation. Its precision machining reduces vibration and mechanical wear over long operating cycles.

Blower Shaft Retainer – Series 71

This small but vital part holds the shaft securely in position. Replacing worn retainers prevents axial play that can cause gear misalignment and noise.

Coupling Hub and Hub Plate Assemblies

Both the hub plate (4" outer diameter, 2.38" inner) and accessory drive hub are available for thin 48-spline shafts, enabling safe attachment of auxiliary components such as hydraulic pumps or marine gear accessories.

Blower Coupling – Thick 29 Spline Shaft

Engines like the 16V71, 6V92, and 12V92 require the thicker 29-spline shaft coupling, providing additional torque handling for higher displacement engines.

Blower Shaft – 4.89" Thick 29 Spline

Perfect for 16V71, 6V92, and 12V92 models, this short heavy-duty shaft offers exceptional durability for high-output engines operating under continuous load.

Accessory Drive Hub – 29 Spline Shaft (Series 92)**

Designed for Series 92 engines, this drive hub ensures precise synchronization between the blower and auxiliary gear drive systems.

Gaskets, Seals, and Bearings

Air and oil containment are essential for blower performance. Diesel Pro Power’s gasket and seal selection includes every interface required during installation or overhaul.

Blower Drive Gear Cover Gasket

Prevents oil seepage around the blower drive gear cover, maintaining clean operation and preventing contamination of surrounding components.

Blower Screen Gasket

A common replacement item for 8V71, 16V71, 8V92, and 12V92 engines, this gasket ensures a proper seal at the blower screen to prevent unfiltered air entry.

End Plate and Installation Gaskets

Blower end plate gaskets come in pairs, providing a perfect seal to contain boost pressure and prevent air leakage.

Governor Cover and Spring Gaskets

These small yet essential seals prevent oil leakage and keep contaminants out of the governor assembly.

Blower Seals and Sleeves

For Series 71 and 92 engines, the blower seal and seal sleeve work together to contain oil while maintaining smooth blower shaft rotation.

Bearing for Accessory and Blower Gear Drive

The washer-shaped bearing supports the blower and accessory gear assemblies, reducing friction and extending gear life in both V71 and V92 engines.

Blower Drive Cover Components

Blower Drive Cover Seals

Available in multiple dimensions (4.65" × 2.97" and 4½" × ¾"), these seals provide tight containment between the blower housing and gear cover, essential for consistent oil retention and gear alignment.

Clamp for Blower Drive Cover Seal

This robust clamp secures the seal in position, ensuring that it remains stable even in high-vibration environments such as marine engine rooms.

Air Intake and Exhaust Accessories

Detroit Diesel Marine Silencer

Designed for engines 4-71 through 16V92, this marine silencer provides efficient noise reduction without restricting airflow. Constructed from corrosion-resistant materials, it is suitable for long-term marine use.

Air Cleaners for Industrial Applications

Available in 5-inch inlet diameters with 12" and 16" heights, these Detroit Diesel and Cummins air cleaners provide heavy-duty filtration for stationary and mobile installations. High-flow design maintains boost pressure while protecting your blower and cylinders from dust and debris.

Air Box Breather Valve Assembly

Maintains crankcase ventilation by releasing excess pressure safely. This valve prevents oil contamination of the blower intake and helps maintain clean air circulation within the airbox.

Electrical and Control Components

Shutdown Solenoids

Available in 12-volt and 24-volt configurations, these solenoids ensure immediate and reliable engine shutdown when required. Built for marine and industrial conditions, they resist corrosion and maintain fast actuation even under heavy vibration.

Teleflex Morse Marine Cable Terminals

The ball joint and clevis-type terminals for 1/4” 43C marine cables provide smooth, precise throttle or governor control — a must for marine propulsion systems powered by Detroit Diesel engines.

Finishing & Maintenance Supplies

Detroit Diesel Green Engine Paint

Restore the authentic factory look of your Detroit Diesel engine with Detroit Green paint. Formulated for high-temperature resistance and long-lasting gloss retention, it’s available for ground shipping within the U.S. and Canada.

Gasket Spray – High Tack Sealant

Perfect for holding and sealing cut gaskets during reassembly, this high-tack spray offers dependable adhesion and flexibility even under high heat and pressure. Recommended for Detroit Diesel and Cummins engines.

Why Buy from Diesel Pro Power

Diesel Pro Power has been a trusted global supplier of Detroit Diesel parts for decades, serving over 40,000 satisfied customers in more than 180 countries. When you purchase your 8V71 or 16V71 blower and components from Diesel Pro Power, you’re investing in reliability, precision, and customer service that understands Detroit Diesel engines inside and out.

• Complete Inventory: From blowers and shafts to gaskets, seals, and couplings, every part required for your rebuild or repair is available under one roof.

• Worldwide Shipping: Fast, insured shipping to over 180 countries ensures your parts arrive when you need them.

• Quality Assurance: Every rebuilt blower is fully inspected and pressure-tested to guarantee performance equal to OEM standards.

• Expert Support: Our team specializes in Detroit Diesel engines, offering guidance for correct part selection and installation.

• Proven Track Record: Diesel Pro Power has supported marine engineers, fleet operators, and industrial technicians for decades with dependable aftermarket and rebuilt parts.