Cummins KTA 19 Engine Parts for Canada - Turbo Section

Cummins KTA19 Turbocharger Parts Catalog

The turbocharger system on the Cummins KTA19 engine plays a critical role in maximizing horsepower, improving fuel efficiency, and maintaining proper air-to-fuel ratios during operation. Whether you’re running a KTA19 in a commercial marine vessel, mining rig, generator set, or heavy industrial equipment, keeping the turbo system sealed and functioning efficiently is essential to power output, engine reliability, and long-term performance.

Diesel Pro Power offers a full line of turbo mounting gaskets, exhaust manifold gaskets, and related turbo accessories engineered to fit all KTA19 and QSK19 engine configurations. These gaskets are designed to handle high pressures and extreme exhaust temperatures while preventing boost leaks and exhaust gas loss.

With more than 40,000 customers worldwide, Diesel Pro Power is your trusted supplier for premium Cummins KTA19 turbo parts.

The Role of the Turbocharger on the KTA19

The Cummins KTA19 uses a high-capacity, fixed-geometry or water-cooled turbocharger to increase the mass of air entering the combustion chamber. This enables the engine to burn more fuel more efficiently—boosting power and improving thermal efficiency.

Turbocharger Benefits for the KTA19:

• Increased horsepower without increasing displacement

• Lower specific fuel consumption (SFC)

• Improved high-altitude performance

• Reduced black smoke during heavy load transitions

• More consistent performance in hot or humid environments

When turbo seals, gaskets, or exhaust connections fail, the engine can lose boost pressure, overheat, or suffer fuel-rich combustion that damages pistons and heads.

Cummins Turbo Mounting Gaskets for KTA19

Turbo Mounting Gasket (Standard Application)

This turbocharger mounting gasket seals the joint between the turbocharger flange and the exhaust manifold or adapter flange. It is designed for high-heat resistance and prevents exhaust gas leakage during turbo operation.

Key Features:

• Designed specifically for the KTA19 and QSK19 turbo installations

• Constructed with high-temperature-resistant materials to withstand prolonged exposure to extreme exhaust gas temperatures

• Reinforced for vibration-heavy environments such as marine or mining equipment

• Prevents loss of exhaust energy which could lead to reduced boost pressure and efficiency

When to Replace:

• Whenever the turbo is removed for inspection or service

• If there are signs of soot accumulation around the turbo mounting flange

• If audible leaks or whistling are detected during operation

Proper sealing ensures the turbo system performs optimally and that backpressure does not build in the exhaust manifold.

Turbo Mounting Gasket (Water-Cooled Turbocharger Applications)

Some KTA19 engine configurations, especially those operating in marine environments or high-load industrial generators, utilize water-cooled turbochargers. These systems manage additional heat generated during sustained heavy-duty cycles.

Gasket Highlights:

• Specifically engineered for water-cooled turbo applications

• Seals both exhaust gas and coolant passages between the turbo and manifold

• Prevents coolant leaks into the turbocharger assembly

• Compatible with upgraded and aftermarket water-cooled turbo systems

Use Cases:

• Tugboats or fishing vessels under prolonged load

• Industrial generator sets operating at continuous high RPM

• Offshore platforms where turbo cooling is critical for safety and emissions

Replacing this gasket is essential anytime the turbo is removed, especially in saltwater environments where corrosion can affect mating surfaces.

Cummins Exhaust Manifold Outlet Connection Gasket

The exhaust manifold outlet gasket ensures a tight seal between the exhaust manifold outlet and the turbocharger inlet or exhaust pipe flange. It is vital for maintaining turbo efficiency and directing exhaust gases through the turbo impeller without pressure loss.

Why This Gasket Matters:

• Exhaust leaks at this joint can lead to decreased boost levels

• Prevents raw exhaust gases from escaping into the engine room or operator space

• Maintains proper exhaust gas flow to the turbo for consistent performance

• Reduces the risk of heat damage to adjacent components by ensuring proper gas routing

Material & Durability:

• Constructed from multi-layer steel or graphite composite for thermal stability

• Designed to handle over 1,000°F of sustained exhaust temperature

• Resistant to vibration-induced stress cracks or gasket blowout

Installation Tips:

• Always clean mating surfaces before gasket installation

• Use proper torque specifications to avoid overtightening

• Replace gasket if there are any signs of carbon tracking or blow-by

Common Turbo-Related Maintenance on the Cummins KTA19

Even though Cummins turbochargers are known for their durability, routine inspection and timely replacement of mounting and exhaust gaskets are key to extending engine life.

Signs of Turbo or Gasket Problems:

• Whistling or high-pitched sounds under boost

• Soot deposits near turbo mounting points

• Boost pressure not reaching target levels

• Visible oil or coolant leaks around the turbo housing

• Increased exhaust smoke under load

• Higher-than-normal EGTs (exhaust gas temperatures)

Preventive Maintenance Actions:

• Replace gaskets anytime the turbo is removed or replaced

• Inspect mounting studs and nuts for wear or corrosion

• Check alignment and torque specs on all turbo flange connections

• Examine surrounding hoses and connections for leaks or cracks

A well-maintained turbo system not only improves performance but also safeguards the engine against overheating and inefficient combustion.

Why Turbo Sealing Components Matter on the KTA19

Sealing components like turbo mounting gaskets and exhaust flange gaskets are more than just accessories—they are essential to maintaining boost pressure and ensuring the engine performs to its rated horsepower.

Boost Pressure Integrity:

A small exhaust leak upstream of the turbo can dramatically reduce boost pressure, increasing fuel consumption and lowering torque output. Over time, this can lead to poor fuel economy, soot buildup in the cylinders, and turbocharger underperformance.

Temperature Control:

Proper sealing keeps hot exhaust gases routed through the turbo housing, not leaking into the engine bay. This helps maintain lower ambient engine room temps, reduces fire hazards, and supports exhaust aftertreatment components where applicable.

Safety and Emissions:

Uncontrolled exhaust leaks can create hazardous conditions for operators, especially in enclosed engine rooms. Maintaining tight exhaust connections is also key to meeting emissions standards for regulated applications.

Additional Components to Inspect with Turbo Gasket Service

While replacing turbo mounting gaskets, it's good practice to also inspect or replace:

• Turbo mounting hardware: Nuts, bolts, and washers often corrode or lose clamping force

• Exhaust manifold studs: Can warp or strip under repeated heat cycling

• Turbo oil supply and return lines: Check for leaks or clogging

• Coolant lines (if water-cooled): Replace gaskets and seals to prevent leaks

• Boost pressure sensor hoses: Ensure sensors are receiving accurate pressure data

• Charge air cooler and piping: Inspect for boost leaks or oil residue

Doing so ensures that your turbo system is functioning as an integrated whole—not just a standalone component.

Diesel Pro Power Delivers Turbo Parts You Can Trust

• OEM-equivalent or better quality turbo gaskets and sealing components

• Worldwide shipping with fast order processing

• Expert assistance matching parts to KTA19 and QSK19 engine configurations

• Inventory in stock—no long lead times or backorders

• Trusted by marine fleets, generator operators, and industrial clients globally

Whether you're replacing a single gasket or doing a full turbo and exhaust refresh, Diesel Pro Power has the reliable components you need to keep your Cummins KTA19 operating at peak efficiency.